**What**
Currently only cron pattern are supported by scheduled jobs, this can lead to issue. for example you set the pattern to execute every hours at minute 0 and second 0 (as it is expected to execute at exactly this constraint) but due to the moment it gets executed we our out of the second 0 then the job wont get executed until the next scheduled cron table execution.
With this pr we introduce the `interval` configuration which allows you the specify a delay between execution in ms (e.g every minute -> 60 * 1000 ms) which ensure that once a job is executed another one is scheduled for a minute later.
**Usage**
```ts
// jobs/job-1.ts
const thirtySeconds = 30 * 1000
export const config = {
name: "job-1",
schedule: {
interval: thirtySeconds
},
}
```
What:
* Old deployments have repeatable jobs registered in a wrong queue. When the `server` instance picks that job, the workflow doesn't exist, it calls to remove the job, which then removes the job from the new queue.
* This PR cleans up any repeatable job from the queue that is exclusive to handle workflows.
Fixes: FRMW-2930
This PR updates the MikroORM config to use the module name as the snapshot name when generating migration files. Otherwise, MikroORM defaults to the database name and every time you update the database name, it will create a new snapshot.
Also, we migrate existing snapshot files to be same the new file name to avoid breaking changes.
**What**
- Reworks how admin extensions are loaded from plugins.
- Reworks how extensions are managed internally in the dashboard project.
**Why**
- Previously we loaded extensions from plugins the same way we do for extension found in a users application. This being scanning the source code for possible extensions in `.medusa/server/src/admin`, and including any extensions that were discovered in the final virtual modules.
- This was causing issues with how Vite optimizes dependencies, and would lead to CJS/ESM issues. Not sure of the exact cause of this, but the issue was pinpointed to Vite not being able to register correctly which dependencies to optimize when they were loaded through the virtual module from a plugin in `node_modules`.
**What changed**
- To circumvent the above issue we have changed to a different strategy for loading extensions from plugins. The changes are the following:
- We now build plugins slightly different, if a plugin has admin extensions we now build those to `.medusa/server/src/admin/index.mjs` and `.medusa/server/src/admin/index.js` for a ESM and CJS build.
- When determining how to load extensions from a source we follow these rules:
- If the source has a `medusa-plugin-options.json` or is the root application we determine that it is a `local` extension source, and load extensions as previously through a virtual module.
- If it has neither of the above, but has a `./admin` export in its package.json then we determine that it is a `package` extension, and we update the entry point for the dashboard to import the package and pass its extensions a long to the dashboard manager.
**Changes required by plugin authors**
- The change has no breaking changes, but requires plugin authors to update the `package.json` of their plugins to also include a `./admin` export. It should look like this:
```json
{
"name": "@medusajs/plugin",
"version": "0.0.1",
"description": "A starter for Medusa plugins.",
"author": "Medusa (https://medusajs.com)",
"license": "MIT",
"files": [
".medusa/server"
],
"exports": {
"./package.json": "./package.json",
"./workflows": "./.medusa/server/src/workflows/index.js",
"./.medusa/server/src/modules/*": "./.medusa/server/src/modules/*/index.js",
"./modules/*": "./.medusa/server/src/modules/*/index.js",
"./providers/*": "./.medusa/server/src/providers/*/index.js",
"./*": "./.medusa/server/src/*.js",
"./admin": {
"import": "./.medusa/server/src/admin/index.mjs",
"require": "./.medusa/server/src/admin/index.js",
"default": "./.medusa/server/src/admin/index.js"
}
},
}
```
**What**
- display minutes instead of months
- remove manual offsetting since the server returns ISO format and JS date converts it to local time
---
CLOSES SUP-1069
FIXES SUP-1101
also fixes https://github.com/medusajs/medusa/issues/11743
**What**
The store cors is currently applied after the ensure publishable API key middleware, in this pr the order is fixed and the cors will be applied first.
**What**
Currently, the workflow engine redis does not make any distinction between worker modes, when starting as server, the engine listen to the queue which contains everything and try to execute the corresponding workflow which does not exists since job workflows are not loaded in server mode. Now, a dedicated queue is created for jobs and the worker is only started if the instance is not in server mode. In order to clean up the old queue, if the old queue trigger a scheduled job then it gets removed from the queue since it will get re added to the new queue by the new worker instances
**What**
- Uses derived state in DataTable, to prevent the state in the URL and component from going out of sync.
- Introduces a way for RouteModals to restore URL params on close.
Resolves CMRC-936
**What**
Currently, we are potentially providing an array of selector/data leading to fetching data sequentially before running on update which will fetch data again in batch and perform the update. Now we can pass the data directly which includes the id already and only perform one bulk fetch + one bulk update.
This pr also include a fix on the inventory validation, currently, only the item to update inventory is being checked, with this pr we also check the inventory for the items that needs to be created
**What**
- Prevent event release when a workflow is run as step and finish
- Use `unlink` instead of `del` when removing keys from redist to push the execution to async thread
Fixes: FRMW-2920
The feature is called `middleware-file-loader`, because it does more than just collecting middlewares. It also collects the bodyParser config for routes
**What**
- Fix soft deletion and restoration emitted events
- Improve soft deleted/restore algorithm
- Fix big number field handling null value during partial hydration from mikro orm
**What**
Some steps were calling the modules even when nothing was needed which for some operations would create transaction for nothing leading to extra execution time that add up very quickly on cloud network
Co-authored-by: Carlos R. L. Rodrigues <37986729+carlos-r-l-rodrigues@users.noreply.github.com>
What:
* Not all Cart operations need a full refresh updating items. This PR introduces a flag to force the refresh for special ocasions, like updating the Cart's region, or transfering the Cart to another customer. For all other flows it will update only promotions, taxes and payment collection if needed.
**What**
- Move create product to use native create by structuring the data appropriately, it means no more `upsertWithReplace` being very poorly performant and got 20x better performances on staging
- Improvements in `upsertWithReplace` to still get performance boost for places that still relies on it. Mostly bulking the operations when possible
Co-authored-by: Carlos R. L. Rodrigues <37986729+carlos-r-l-rodrigues@users.noreply.github.com>
Fixes: FRMW-2919
This PR adds a new routes loader with a single responsibility of scanning the filesystem and collecting routes. Sorting of routes, merging middleware and registering them with express are going to separate implementations.
The new `RoutesLoader` class allows overriding routes as-well (not recommended though) and this is how routes are de-duplicated.
- When two routes for the exact route pattern/matcher are discovered, the routes loader will only keep the last one.
- Routes files can also override handlers for specific HTTP methods. For example, the original route file exported handlers for `GET` and `POST`, but the overriding one only defines `GET`. In that case, we will continue using the original implementation for the `POST` handler.
- If an overriding route file exports additional configuration like `export const AUTHENTICATION=false`, then this will only impact the handlers exported from this file and not the original handlers.
Routes sorting has been already been implemented in a separate PR and you can visualize it using this URL. https://routes-visualizer.fly.dev/
**What**
- The types package has an optional peerDep on vite@5. This causes issues if the package is installed in a repo that has vite@6 installed. An example could be a `react-router/remix` storefront.
- Loosen the dependency to accept either vite@5 or vite@6.
Resolves SUP-970
Harminder Virk
Riqwan Thamir
Kasper Fabricius Kristensen
Adrien de Peretti
Carlos R. L. Rodrigues
olivermrbl
Frane Polić
Oli Juhl
BOUAZZA Ayyoub
Shahed Nasser